AT Command Set for Nokia 8210 31
Copyright © 2000. Nokia Mobile Phones. All rights reserved.
+CPBR Read Phone Book Entries
If given index range is valid but all entries in it are empty, response is empty.
<nlength> and <tlength> parameters of test command may be figured out from ME
model or (in case of SIM) left empty. (GSM 07.07 section 8.12.)
Syntax:
AT+CPBR=<index1>, <index2>
Response is [+CPBR: <index1>,
<number>, <type>, <text>[[...] +CPBR:
<index2>, <number>, <type>, <text>]]
AT+CPBR=?
Show supported values. Response is
+CPBR: (<index>-
list),[<nlength>],[<tlength>]
Parameters:
<index1>, <index2>, <index>: integer type values in the range of location numbers
of phonebook memory
<number>: string type phone number of format <type>
<type>: type of address octet in integer format (GSM 04.08, subclause 10.5.4.7)
<text>: string type field of maximum length <tlength>; character set as specified by
command Select TE Character Set +CSCS
<nlength>: integer type value indicating the maximum length of field <number>
<tlength>: integer type value indicating the maximum length of field <text>
+CPBS Select Phone Book Memory Storage
Selects memory where phonebook commands operate. Supported <storage> values
depend on the product. Storages not defined in 07.07: "ON" = own numbers
(MSISDNs), "EN" = emergency number, "MC" = missed calls, "DC" = dialled calls,
"RC" = received calls. (GSM 07.07 section 8.11. )
Syntax:
AT+CPBS=<storage>
The default option is "SM".
AT+CPBS?
Query current setting.
Response is +CPBS:
<storage>,<used>,<total>.
AT+CPBS=?
Show supported values.
Response is +CPBS: (list of supported
<storage>'s)
Parameters:
<storage>:
"FD"
SIM fixdialling-phonebook
"LD"
SIM last-dialling-phonebook
"ME"
ME phonebook
"MT"
combined ME and SIM phonebook
"SM"
SIM phonebook
"TA"
TA phonebook
<used>: integer type value indicating the number of used locations in selected
memory
<total>: integer type value indicating the total number of locations in selected
memory
To Next Page
Loading...
Need help?
General
