Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide 13
About this Guide
This guide provides information for the installation and use of the Nokia
EM5400 IP Security Platform appliances, which consists of the Nokia IP260
and Nokia IP265 appliances. Installation and maintenance should be
performed by experienced technicians or Nokia-approved service providers
only.
This preface provides the following information:
In This Guide
Conventions This Guide Uses
Related Documentation
In This Guide
This guide is organized into the following chapters and appendixes:
Chapter 1, “Overview” presents a general overview of the Nokia EM5400
IP Security Platform.
Chapter 2, “Installing a Nokia EM5400 IP Security Platform Appliance”
explains how to rack mount the appliance and how to physically connect
it to a network and power.
Chapter 3, “Performing the Initial Configuration” explains how to make
the appliance available on the network.
Chapter 4, “Connecting to the Ethernet Ports” describes how to connect to
the supported Ethernet ports.
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances
To Next Page
Loading...
