Using the Command-Line Interface to Manage Your Appliance
Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide 45
Nokia Network Voyager Inline Help for IPSO
You can access inline help when you use Nokia Network Voyager. Inline help
is the context-sensitive information source for
Network Voyager.
To access inline help for the window you are viewing, click Help. Close and
Print buttons are available at the bottom of each inline help window you view.
Using the Command-Line Interface to Manage
Your Appliance
You can also use the Nokia IPSO command-line interface (CLI) to manage
and configure Nokia IP security platforms from the command line.
Everything that you can accomplish with Network Voyager you can also do
with the CLI.
Log on to the platform by using a command-line connection (SSH, console, or
Telnet) over a TCP/IP network as an admin, cadmin, or monitor user:
If you log in as a cadmin (cluster administrator) user, you can change and
view configuration settings on all the cluster nodes. For information about
how to administer a cluster, see the traffic management commands
section in the CLI Reference Guide for the version of IPSO you are using.
If you log in as a monitor user, you can execute only the show form of
commands. That is, you can view configuration settings, but you cannot
change them.
You can now execute CLI commands from the CLI shell and the IPSO shell.
The IPSO shell is what you see when you initially log on to the platform.
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances
To Next Page
Loading...
