Viewing Nokia IPSO Documentation by Using Nokia Network Voyager
Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide 43
Network Voyager to Manage Your Appliance” on page 42 and “Nokia
Network Voyager Inline Help for IPSO” on page 45.
To open Nokia Network Voyager
1. Start a Web browser on the host you plan to use to configure or monitor
your appliance.
2. In the Location or Address field, enter the IP address of the initial
interface you configured for the appliance.
You are prompted to enter the admin username and the password you
entered when you performed the initial configuration.
Note
If the username login screen does not appear, you might not have a
physical network connection between the host and your appliance, or you
might have a network routing problem. Confirm the information you
entered during the initial configuration and check that all cables are firmly
connected. For more information, see Chapter 8, “Troubleshooting.”
Viewing Nokia IPSO Documentation by Using
Nokia Network Voyager
As you use Nokia Network Voyager, the Nokia Network Voyager Reference
Guide for the version of IPSO you are using and Network Voyager inline help
(context-sensitive help) are available for you to use.
You can access both information sources from the Voyager interface, as
Figure 9 shows.
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances
To Next Page
Loading...
