Nokia EM5400 - Connecting to the Ethernet Ports; Built-In Four-Port 10;100 Ethernet Interface

Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide 47
4 Connecting to the Ethernet
Ports
This chapter describes how to connect Ethernet network cabling to your
Nokia EM5400 IP Security Platform appliance.
Caution
To help guard against electrostatic discharge damage, make sure
you are properly grounded by using a grounding wrist strap and
following the instructions provided with the wrist strap before you
handle the components or open the appliance. If you do not have a
grounding wrist strap, make sure you are properly grounded before
you touch any electronic component.
Built-In Four-Port 10/100 Ethernet Interface
Every Nokia EM5400 IP Security Platform appliance has four built-in
dual-mode 10-Mbps and 100-Mbps ports.
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances