Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide 37
3 Performing the Initial
Configuration
The first time you turn on power to a Nokia EM5400 IP Security Platform
appliance, the initial configuration process begins. This process enables you
to configure the network settings and provides access to the admin account.
This chapter describes how to perform the initial configuration manually by
using a console connection. It includes the following sections:
Using a Console Connection
Connecting Power and Turning the Power On
Performing the Initial Configuration
Connecting Network Interfaces
Using Nokia Network Voyager to Manage Your Appliance
Viewing Nokia IPSO Documentation by Using Nokia Network Voyager
Using the Command-Line Interface to Manage Your Appliance
Using Nokia Horizon Manager
Note
Nokia recommends that you physically install all hardware components
before you perform the initial configuration procedure this chapter
describes. For information about how to install other components, see
Chapter 6, “Installing PC Cards.”
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances
To Next Page
Loading...
