Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide 29
2 Installing a Nokia EM5400 IP
Security Platform Appliance
You can rack mount Nokia EM5400 IP Security Platform appliances in the
following ways:
A single appliance in a one-unit space (1U)
Two appliances can be rack mounted in a 1U space if you install them in a
rack-mountable shell, which you can order separately.
This section describes how you can perform both of these installations.
Rack Mounting a Single Nokia EM5400 IP Security
Platform Appliance
Before you mount the appliance on the rack, install the two side brackets with
four screws on each side as shown in Figure 6. The brackets and screws are
included with the materials you receive with the appliance.
Two mounting positions allow you to mount the appliance either flush with
the rack (bracket position A), or two inches forward of the rack (bracket
position B).
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances
To Next Page
Loading...
