Transferring Files with the Flash-Memory PC Card
Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide 57
3. Mount the PC card by using the following command:
mount /dev/wd1 /cdrom
The /cdrom directory is a default directory in IPSO for mounting media.
4. Use the cp command to transfer IPSO images or configuration files to and
from the PC card.
For example, to copy the current IPSO image from the compact flash to
the flash-memory PC card, use the following command:
cp /image/current/ipso.tgz /cdrom/
5. Use the following command to unmount the PC card before you eject it:
umount /cdrom
6. To remove the card, slowly push the eject button located to the left of the
card.
Caution
Hold the PC card while you push the eject button to prevent the card
from ejecting too quickly.
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances
To Next Page
Loading...
