Nokia EM5400 - Page 64

7 Using the Nokia IPSO Boot Manager
64 Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide
For example:
BOOTMGR[2]> sysinfo
CPU 0: 400 MHz unknown
Memory: 536870912 (512M bytes)
Disk Devices:
IO port 0x1f0 wdc0: unit 0 (wd0): <SMART ATA
FLASH>
512MB (1001952 sectors), 994 cyls, 16
heads, 63 S/T, 512 B/S
IO port 0x2000 wdc7: unit 0 (wd1): <SanDisk
SDP3B-512>
512MB (1000944 sectors), 993 cyls, 16
heads, 63 S/T, 512 B/S
Network Interfaces:
loop0: flags=10b<UP,LINK,LOOPBACK,PRESENT>
soverf0: flags=2923<UP,LINK,MULTICAST,PRESENT,IPV6ONLY>
stof0: flags=2903<UP,LINK,PRESENT,IPV6ONLY>
tun0: flags=107<UP,LINK,POINTOPOINT,PRESENT>
eth1: flags=131<LINK,BROADCAST,MULTICAST,PRESENT>
ether 0:a0:8e:72:4:10 speed 10M full duplex
eth2: flags=131<LINK,BROADCAST,MULTICAST,PRESENT>
ether 0:a0:8e:72:4:11 speed 10M full duplex
eth3: flags=130<BROADCAST,MULTICAST,PRESENT>
ether 0:a0:8e:72:4:12 speed 10M full duplex
eth4: flags=130<BROADCAST,MULTICAST,PRESENT>
ether 0:a0:8e:72:4:13 speed 10M full duplex
BOOTMGR[3]>
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances