7 Using the Nokia IPSO Boot Manager
72 Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide
where boot-device is the storage device from which the boot manager loads at
boot up and boot-file is the new boot manager image. The new boot manager
image is named nkipflash. Execute the upgrade_bootmgr command from
Nokia IPSO (the operating system), not from the boot manager.
For complete upgrade procedures, see the appropriate version of the IPSO
Release Notes.
To upgrade the boot manager
1. Obtain the upgraded boot-manager image from the appropriate
Nokia Customer Support site as listed in “Nokia Contact Information” on
page 3.
2. At the IPSO command prompt, enter:
/etc/upgrade_bootmgr wd0 /etc/nkipflash
The command upgrades the boot manager with the new image
(nkipflash), writing it into the compact flash memory (wd0). The upgrade
takes some time to complete. Do not interrupt the upgrade process.
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances
To Next Page
Loading...
