Parts
7-1
Part 1604857-04
E 2014 Nordson Corporation
Section 7
Parts
Introduction
To order parts, call the Nordson Industrial Coating Systems Customer
Support Center at (800) 433-9319 or contact your local Nordson
representative.
This section covers parts for the Encore LT spray gun, controller, system
components and parts, powder and air tubing, and options.
Refer to the following manuals for additional information and optional
equipment.
Encore LT Manual System Operator Card: 1108213
Encore Generation II Powder Feed Pump: 1095927
Encore 150 and 300-mm Lance Extensions: 1093657
Pattern Adjuster Kit for Lance Extensions: 1100013
Pattern Adjuster Kit for Encore Manual Spray Guns: 10984490
These manuals can be downloaded from:
http://emanuals.nordson.com/finishing/
(click on Powder−US, then Encore Systems)
System Part Numbers
Use these part numbers to order complete systems.
Part Description Note
1107897 SYSTEM, dolly with vibratory box feeder, 115 V, VBF, Encore LT
1107898 SYSTEM, dolly with vibratory box feeder, 220 V, VBF, Encore LT
1107901 SYSTEM, dolly with hopper, 50 lb, Encore LT
1108212 SYSTEM, rail mount, Encore LT
1600438 SYSTEM, wall mount, Encore LT
Spray Gun Parts
See Figure 7-1 and the parts list on the following pages.
To Next Page
Loading...
