Parts
7-16
Part 1604857-04
E 2014 Nordson Corporation
Powder Hose and Air Tubing
Powder hose and air tubing must be ordered in increments of one foot.
Part Description Note
768176 Powder hose, 11 mm antistatic A, E
768178 Powder hose, 12.7 mm (
1
/
2
in.) antistatic A, E
900648 Powder hose, 11 mm blue D
900650 Powder hose, 12.7 mm (
1
/
2
in.) blue D
900617 Air tubing, polyurethane, 4 mm, clear B
900742 Air tubing, polyurethane, 6 mm, blue B
1096789 Air tubing, antistatic, 6/4 mm, black (conductive air tubing) C
900741 Air tubing, polyurethane, 6 mm, black
900618 Air tubing, polyurethane, 8 mm, blue B
900619 Air tubing, polyurethane, 8 mm, black B
900740 Air tubing, polyurethane, 10 mm, blue B
900517 Tubing, poly, spiral cut, 0.62 in. ID
301841 Strap, Velcro, w/buckle, 25 x 3 cm
NOTE A: Twenty feet of 11-mm antistatic hose is provided with the systems. If you need to use a longer length, you
must switch to the 1/2 inch hose to prevent powder delivery issues.
B: Minimum order quantity is 50 ft.
C: This tubing is used on VBF systems to provide fluidizing air from the bulkhead union to the pickup tube. It
is conductive and grounds the pickup tube to the cart body. Do not replace with non-conductive tubing.
D: Minimum order quantity is 25 ft.
E: Minimum order quantity is 100 ft.
System Options
Part Description Quantity Note
1091429 KIT, input air, Encore manual systems 1
972841
S CONNECTOR, male, 10 mm tube x
1
/
4
in. unithread
1
971102
S CONNECTOR, male, 10 mm tube x
3
/
8
in. unithread
1
973500
S COUPLING, pipe, hydraulic,
1
/
4
in., steel, zinc
1
973520
S COUPLING, pipe, hydraulic,
3
/
8
in., steel, zinc
1
900740
S TUBING, polyurethane, 10 mm, blue
20 ft A
1086131 BRACKET, adapter, dual pickup tube 1 B
1600188 KIT, small parts tray 1 C
NOTE A: Replacement tubing has a minimum order quantity of 50 ft.
B: Use this bracket to install two pickup tubes on the arm assembly.
C: For mobile systems only. To install the tray, remove the 2 top screws from the controller tower, install the
#10 dished lock washer in the kit on one screw, then use the screws to install the tray.
To Next Page
Loading...
