Nordson Encore LT - Spray Gun Options; Miscellaneous Spray Gun Options

Parts
7-4
Part 1604857-04
E 2014 Nordson Corporation
NoteQuantityDescriptionPartItem
31 1604828
S KIT, conical nozzle, Encore
32 1083206
SS DEFLECTOR ASSEMBLY, conical, 26 mm
1 A
32A 1098306
SSS O-RING, Viton, 3 mm x 1.1 mm wide
1 B
33 1082060
SS NOZZLE, conical
1 A
34 1605861
SS HOLDER, electrode, M3, conical, Encore
1
35 1106200
S KIT, hose adapter, hose, handgun, Encore
1
35A 940157
SS O-RING, Viton, black, 0.563 x 0.688, 10415
2
NS 900617
S TUBE, polyurethane, 4 mm OD, clear
AR C
NS 900741
S TUBING, polyurethane, 6/4 mm, black
AR C
NS 900620
S TUBING, poly, spiral cut,
3
/
8
in. ID
AR C
NOTE A: 4-mm flat spray nozzle, conical nozzle and 26 mm deflector are shipped with the spray gun. Refer to the
following pages for optional nozzles.
B: This O-ring is a component of all deflectors.
C: Order in increments of one foot or one meter.
D: Also available in wear resistant material. Refer to Spray Gun Options.
E: Optional 6 meter extension available, refer to Spray Gun Options.
F: For flat spray nozzle use only. Use kit item 31 to convert for conical nozzle and deflector use.
AR: As Required
NS: Not Shown
Spray Gun Options
Miscellaneous Spray Gun Options
See Figure 7-1.
Item Part Description Quantity Note
4 1096698 KIT, powder outlet tube, wear resistant 1
4A 941113
S O-RING, silicone, 0.438 x 0.625 x 0.094 in.
1
4B 1081785
S O-RING, silicone, 0.468 x 0.568 x 0.05 in.
1
18 1096696 ELBOW, powder tube, Encore, impact resistant 1
NS 1100012 KIT, pattern adjuster, Encore lance extensions 1 A
NS 1085168 CABLE, 6 meter extension, shielded, Encore
manual
1
NS 1100777 KIT, cup gun, Encore 1 B
NOTE A: This pattern adjuster kit is only for use with a lance extension. See page 7-8 for the standard pattern
adjuster kit.
B: Refer to the instruction sheet 1102764 shipped with the kit for instructions.
NS: Not Shown