DECLARATION of CONFORMITY
PRODUCT: Encore LT Automatic and Manual Powder Spray Systems
Models: Encore Automatic Applicator and Encore LT Automatic Controllers
Encore LT Manual Applicator with Encore LT Manual Controller
Description: The automatic electrostatic powder spray system includes applicator, control cable, and
associated controllers. These controllers are available in a one applicator, dual applicator, or 4−8 applicator
system. The 4−8 applicator system is available with or without Axis control for movement of the applicators
in and out of the booth. The manual powder electrostatic powder spray system includes applicator, control
cable, and associated controls. This is available in a stationary system, or in a mobile system.
Applicable Directives:
2006/42/EC − Machinery Directive
2004/108/EEC − EMC Directive
94/9/EC − ATEX Directive
Standards Used for Compliance:
EN/ISO12100-1 (2010) EN60204-1 (2006) EN61000-6-3 (2007) FM7260 (1996)
EN60079-0 (2009) EN50050 (2006) EN61000-6-2 (2005)
EN60079-31 (2009) EN50177 (2009) EN55011 (2009)
Type of Protection:
− Ambient Temperature: +15_C to 40_C
− Ex II 2 D / 2mJ = Manual and Automatic Applicators / Automatic Applicators are Type: A-P per EN50177
− EX II (2) 3 D = Manual and Automatic Controllers
− EX II (2) D = Automatic 4−8 Applicator Controller with Axis Control
ATEX Product Certificates:
− FM11ATEX0056X (Applicators) (Norwood, Mass. USA)
− FM11ATEX0057X (Controllers) (Norwood, Mass. USA)
ATEX Quality System Certificate:
− 1180 Baseefa (Buxton, Derbyshire, UK)
Date: 13 November 2012
Mike Hansinger
Manager Engineering Development
Industrial Coating Systems
Nordson Authorized Representative in the EU
Person authorized to compile the relevant technical documentation.
Contact: Operations Manager
Industrial Coating Systems
Nordson Deutschland GmbH
Heinrich−Hertz−StraBe 42−44
D−40699 Erkrath
Nordson Corporation S Westlake, Ohio
DOC14033A
To Next Page
Loading...
