CHARGER / DISCAHRGER UL10 OPERATION MAUNAL
© NorTec Electronics 2014
19
6.4 Print out functions
6.4.1 General
The device is provided with a printer with electronic controls. It enables to register results of any op-
eration with a battery in the form of a printed out acknowledgement. The print function in the menu
can be enabled irrespective of the program input.
6.4.2 Print Equipment
The printer includes the following components:
- a printer body
It is attached to the front panel. The rear face has a 21-pin port for the printing mechanism.
- a printing mechanism with a matrix EPSON printer
- a removable front panel
- normal printing paper 50 mm wide
- 2 knurled head screws to secure the printer
- a self-test start pushbutton
- a color ribbon
- a rear 13-pin connector
- a printer controller
The board BT20-9 controller on the rear face of the printer body inside the device controls printing
functions.
To Next Page
Loading...
