CHARGER / DISCAHRGER UL10 OPERATION MAUNAL
34 © NorTec Electronics 2014
6.9.4 Program 420 stage 4
1 2 3 4
P420:S4:DISCHARGE 2 23:34:38
10.5V 04.00A 3.60 AH +054MIN --.-°C
5 6 7 8 9
1 Program number
operation type 4 = maintenance
battery type 20 = enclosed aircraft nickel-cadmium battery
2 stage number = Stage 4
3 stage name = discharge 2
4 23:34:38 = current time
5 10.5 V = current battery voltage
6 4.0 А = current discharge current
The Discharge current of the aircraft nickel-cadmium battery
is equal to the nominal capacity 1 С (А), i.e. the current is
selected that discharges the battery with the capacity 4 Аh
fully within 1 hour. This current is 4 А.
7 3.6 Аh = at the moment of prints-out of the currently selected
capacity
8 0054 MIN When the discharge is 2 the battery is discharged with a on
hour current 4А until the voltage of the battery reaches 0.5 V/battery, i.e. up to 10 V.
9 --, -оС = the temperature measurement is disabled. The available
printed out protocol shows the same data, the identification
data of the operator and the time when it is made.
At the end of stage 4, when the cut-off voltage of 10 V is
reached, the protocol is prepared automatically.
To Next Page
Loading...
