CHARGER / DISCAHRGER UL10 OPERATION MAUNAL
© NorTec Electronics 2014
23
6.5.1.1.5 Charging with direct current (=operation type 5)
The operator selects the charging with direct current and the charging time.
6.5.1.1.6 Charging with direct voltage (=operation type 8)
In this type of operation the device UL10 can be used for both, with and without the connected bat-
tery as a direct voltage source.
Without the battery = (battery type 00)
The device operates as a source of voltage of direct current with a power 40 V / 40 А. The voltage
and current can be set in steps 0.01 V / 0.01 А.
With the battery = (battery type 10-31)
If the battery type >0 is selected the device automatically switches over to the optimal direct voltage
selected for the battery in order to ensure its prolonged charging without affecting the battery’s cha-
racteristics.
To Next Page
Loading...
