NovaStar MX2000 Pro - Protocol; Settings; Configure LCD Screen

MX2000 LED Display Controller User Manual
www.novastar.tech
25
Step 4 After the settings are done, click Apply.
Protocol
Step 1 Select Communication > Protocol from the main menu to access the SNMP settings interface.
Figure 4-11 Protocol
Step 2 Toggle on or off SNMP.

: Enable SNMP.

: Disable SNMP.
Note:
Refer to SNMP Instructions for more details.
Settings
Configure LCD screen
Step 1 Select Settings from the main menu to access the system settings interface.