NovaStar MX2000 Pro - Solution (1 X40 G Fiber Output Card)

MX2000 LED Display Controller User Manual
www.novastar.tech
40
When Working with Other Armor Series Receiving Cards
The formula of calculating the load capacity per Ethernet port and the detailed parameters are as
follows.

8bit: Load capacity × 24 × Frame rate < 1000 × 1000 × 1000 × 0.95

10bit: Load capacity × 48 × Frame rate < 1000 × 1000 × 1000 × 0.95

12bit: Load capacity × 48 × Frame rate < 1000 × 1000 × 1000 × 0.95
Max Load Capacity per Ethernet Port (Pixels)
Frame Rate /
Bit Depth
8bit
10bit
12bit
24 Hz
1,649,306
824,653
824,653
25 Hz
1,583,333
791,667
791,667
30 Hz
1,319,444
659,722
659,722
50 Hz
791,667
395,833
395,833
60 Hz
659,722
329,861
329,861
120 Hz
329,861
164,931
164,931
144 Hz
274,884
137,442
137,442
240Hz
164,931
82,465
82,465
300 Hz
131,944
65,972
65,972
360 Hz
109,954
54,977
54,977
480 Hz
82,465
41,232
41,232
Note
When using a 1G Ethernet port to drive the LED screen, it can achieve its maximum load capacity only when the
load width is 192 pixels or more. If the load width is less than that, the load capacity will be reduced accordingly,
calculated as (192 - load width) × load height.
5G Solution (1x40G Fiber Output Card)
When working with the CA50E and XA50 Pro receiving cards, the formula of calculating the load
capacity per Ethernet port and the detailed parameters are as follows: