MX2000 LED Display Controller User Manual
Applications
Solution Build
Based on the installed output cards (4x10G fiber output card/1x40G fiber output card), users can
build 1G/5G solutions with different models of fiber converters and receiving cards. 1G/5G refers
to the output bandwidth of a single Ethernet port. For more detailed information, please refer to
8 Ethernet Port Load Capacity.
Table 3-1 COEX system build
1G receiving cards such as
A10s Pro
5G receiving cards such as
CA50E
Note
You can install different output cards on the same controller, but output cards with different models cannot be
used to load the same screen.
To Next Page
Loading...
