BF1600 Controller Card Cabline-CA II Plus Connector LED
LED Number LED state Description
D10
ON The CABLINE-CA II PLUS cable is properly connected
OFF The CABLINE-CA II PLUS cable is not properly connected
PCIe Auxiliary Connection Card Cabline-CA II Plus Connector LED
LED Number LED state Description
D1
ON The CABLINE-CA II PLUS cable is properly connected
OFF The CABLINE-CA II PLUS cable is not properly connected
Power-Good Signal LED Interface
There is one green I/O LED to indicate power-good signal. See the below table for LED specifications.
LED Number LED state Description
D5 ON Indicates that all rails are valid and board power is up and running
OFF Power Failure
To Next Page
Loading...
Need help?
General
