Nvidia DGX A100 Service Manual

NVIDIA DGX A100 Service Manual
2. Pull the lever to remove the module.
5. Replace the new NVMe drive in the same slot.
1. Unlock the release lever and then slide the drive into the slot until the front face is ush
with the other drives.
2. Close the lever and lock it in place.
6. Power on the system.
Perform the tasks describes in the chapter U.2 NVMe Cache Drive Post-Installation Tasks.
32 Chapter 7. U.2 NVMe Cache Drive Replacement

Nvidia DGX A100 Specifications

General

GPU	8 x NVIDIA A100 Tensor Core GPUs
System Memory	1 TB DDR4
Storage	15 TB NVMe SSD
GPU Memory	320 GB total (40 GB per GPU)
CPU	2 x 64-Core AMD EPYC 7742
Networking	8 x 200 Gb/s InfiniBand or Ethernet
Interconnect	NVIDIA NVLink