EasyManuals Logo

Nvidia DGX A100 Service Manual

Nvidia DGX A100
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
NVIDIA DGX A100 Service Manual
Note: If 3.84 TB drives are installed but you want to use or add 7.68 TB drives, refer to U.2 NVMe
Cache Drive Upgrade to 7.68 TB Drives for instructions.
6.3. Installing the Optional NVMe Drives
1. Be sure you have obtained the additional drives.
2. Back up any critical data to a network shared volume or some other means of backup.
3. Power o the system using the power button or through the console.
4. Remove the blank ller modules from slots 1, 3, 5, and 7.
1. Push the lever release button (on the right side of the lever) to unlock the lever.
2. Pull the lever to remove the blank ller module.
5. Move the drives in slots 4 and 6 and install in slots 1 and 3.
26 Chapter 6. U.2 NVMe Cache Drive Upgrade from 4 to 8

Table of Contents

Other manuals for Nvidia DGX A100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nvidia DGX A100 and is the answer not in the manual?

Nvidia DGX A100 Specifications

General IconGeneral
GPU8 x NVIDIA A100 Tensor Core GPUs
System Memory1 TB DDR4
Storage15 TB NVMe SSD
GPU Memory320 GB total (40 GB per GPU)
CPU2 x 64-Core AMD EPYC 7742
Networking8 x 200 Gb/s InfiniBand or Ethernet
InterconnectNVIDIA NVLink

Related product manuals