Nvidia DGX A100 - Enabling the TPM and Preventing the BIOS from Sending Block SID Requests; Initializing the System for Drive Encryption

NVIDIA DGX A100 Service Manual
2. Pull the lever to remove the blank ller module.
6. Install the 7.68 TB NVMe drives.
1. Unlock the release lever and then slide the drive into the slot until the front face is ush
with the other drives.
2. Close the lever and lock it in place.
7. Power on the system.
Perform the tasks describes in the chapter U.2 NVMe Cache Drive Post-Installation Tasks.
8.2. Installing the 7.68 TB NVMe Drives 35