Nvidia DGX A100 Service Manual

NVIDIA DGX A100 Service Manual
5. Install the assembled module on the motherboard by inserting the riser card in its slot.
6. Close the motherboard tray lid and then install the motherboard tray.
Refer to the instructions in the section Replacing the Motherboard Tray.
7. Connect all the cables to the motherboard tray.
8. Re-install the DGX OS server software.
See the DGX A100 User Guide for detailed instructions.
11.3. Replacing the M.2 NVMe Riser Assembly 49

Nvidia DGX A100 Specifications

General

GPU	8 x NVIDIA A100 Tensor Core GPUs
System Memory	1 TB DDR4
Storage	15 TB NVMe SSD
GPU Memory	320 GB total (40 GB per GPU)
CPU	2 x 64-Core AMD EPYC 7742
Networking	8 x 200 Gb/s InfiniBand or Ethernet
Interconnect	NVIDIA NVLink