Nvidia DGX A100 - SBIOS Settings; Accessing the SBIOS Setup

NVIDIA DGX A100 Service Manual
1. Close the locking mechanism by turning it back into its slot.
2. Tighten the black thumb screw to secure the card in place.
9. Install the motherboard tray lid and then install the motherboard tray.
Refer to the instructions in the section Replacing the Motherboard Tray.
10. Connect all cables back into the network card ports.
11. Power on the system and log in.
12. Conrm that the system is healthy.
74 Chapter 15. Adding the Optional Dual-port Horizontal Network Card