NVIDIA DGX A100 Service Manual
Caution: Static Sensitive Devices: - Be sure to observe best practices for electrostatic discharge
(ESD) protection. This includes making sure personnel and equipment are connected to a common
ground, such as by wearing a wrist strap connected to the chassis ground, and placing components
on static-free work surfaces.
1. Power down the system.
2. Remove the bezel.
3. Replace the front console board.
1. Using a Phillips #2 screwdriver, loosen the two captive screws that secure the front console
board.
2. Replace the front console board.
3. Tighten the screws.
80 Chapter 17. Front Console Board Replacement
To Next Page
Loading...
Need help?
General
