Nytech DC-8200 Important Notice
4 - English
Cables
Always hold cables by the plug and never pull on the cable itself. Never
hold the charger with wet hands as this may cause a short circuit or electric
shock. Never place the device, heavy objects or furniture on the cable and
take care that the cord does not become trapped, especially at the plug and
sockets. Never make knots in the cable and do not tie it together with other
cords. All cables should be positioned so that nobody can trip over them or
be obstructed by them. A damaged power cord can cause a fire or an
electric shock. Inspect the power cord from time to time. Do not use any
adapter plug or extension cable that does not meet the required safety
standards.
Maintenance and Care
Servicing is required when this device has been damaged in any way, for
example, when the charger or the housing of the Nytech DC-8200 is
damaged, when liquid or objects have entered the device, when the
product has been exposed to rain or moisture, when the product does not
work normally or if the product has been dropped. If you notice any smoke,
unusual noise or strange smells, switch off the device immediately and pull
the charger from the power supply. In this case the device should not be
used further and should be inspected by authorized service personnel.
Please contact qualified personnel when servicing is needed.
Intended Use
This is a consumer electronics device. It may only be used for private use,
not industrial or commercial purposes. In its default configuration, this
product has not been designed for medical, lifesaving, rescue or life-
maintaining purposes. Only connection cables and external devices may be
used that comply with safety standards and the electromagnetic
compatibility and shielding quality of this device.
To Next Page
Loading...
Need help?
General
