Nytech DC-8200 - Audio Recording and Playback; Audio Recording

Nytech DC-8200 Audio Recording and Playback
54 - English
Audio Recording and Playback
Audio Recording
You can use your Nytech DC-8200 to record voice (dictaphone). To do so,
press the Power button [2] to power the camera on.
1. Press the camera mode button [10] to open the Program menu
(see also page 34 – Scene modes).
2. Press W, X, S or T on the four-way button [9] to choose the option
Voice REC (icon
).
3. Press SET [8] to confirm your selection.
4. Press the shutter button [3] to start recording.
5. Press the shutter button [3] to stop recording.
i
The current recording time will appear on the display [12] during
recording. The remaining recording time will be indicated in Stop
mode.
Voice recording takes place via the camera’s microphone [15].
Make sure that you don’t touch the microphone during recording
to avoid any noise.