Nytech DC-8200 User Manual

Nytech DC-8200 Capturing Pictures
English - 19
Capturing Pictures
Quick Guide
1. Power the Nytech DC-8200 on in Recording mode by pressing and
holding the Power button [2] for approx. 1 second.
2. Point the camera at the subject and check the composition of your
picture on the display [12].
3. If necessary, press the Zoom button [4] to zoom in (T - Tele) or
zoom out (W - Wide) on the subject.
4. Press the shutter button [3] halfway down. This will enable the auto-
focus.
i
The Nytech DC-8200 will try to focus the area contained
within the focus area. This will depend on the lighting
conditions and the distance to the subject. After the
subject has been focused successfully, the focus frame
will turn green and a double beep can be heard.
5. Now press the shutter button [3] fully down to take the picture. A
shutter sound can be heard.
Read the chapters from page 34 to learn how to use preset programmes.
Focus area

Nytech DC-8200 Specifications

General

Brand	Nytech
Model	DC-8200
Category	Digital Camera
Language	English