Nytech DC-8200 Introduction
14 - English
The Nytech DC-8200 powers itself off if the LCD screen has been switched
off for longer than one minute. In this case, press the On/Off button [2] to
switch the camera back on.
The energy-saving function is not enabled when:
- the camera is connected via a USB cable to a computer or printer
- a slideshow is being played back
- a video or audio file is being recorded
- a video or audio file is being played
Toggling Between Recording and Playback Mode
The Nytech DC-8200 is ready to record videos or audio files in Recording
mode. In Playback mode the recorded files can be seen on the display [12].
- Press the Play button [5] to toggle between Recording and Playback
mode.
LCD Display
The LCD display [12] of your Nytech DC-8200 is used to configure the
shooting parameters, to check and adjust the camera settings and to
display your captured images. In Recording mode, on-screen icons inform
you of the current camera settings, while in Playback mode information on
the recorded image is displayed.
To Next Page
Loading...
Need help?
General
