Nytech DC-8200 Connectors
English - 63
1. Power your Nytech DC-8200 off.
2. Open the port cover (see the above figure) and insert the USB
cable connector into the connection port of your camera.
3. Plug the USB connector into a free USB port on your computer.
4. Press the Power button [2] to power the camera on. The computer
will detect the camera as a “Removable disk” and will create a new
drive with the next available driver letter. During this process the
message "Connecting..." will appear on the display [12].
5. Open My Computer on your PC and double-click on the new
“Removable disk” drive.
6. All recorded files can be found in the folder “DCIM” on this disk
drive.
Nytech DC-8200 as
“Removable disk”
7. Now you can copy the recorded files from the camera into a folder
of your choice of the computer’s hard disk.
!
Be careful when renaming any folders and files. Do NOT try to
change the folder or file names stored on the camera from the
computer otherwise you may not be able to play back any files
contained here with your Nytech DC-8200.
After you have copied your files or folders to the computer, you
can rename or edit them on the computer.
To Next Page
Loading...
Need help?
General
