Instruction Manual CON 11/110
71
15 SPECIFICATIONS
SPECIFICATIONS CON 11 CON 110
Conductivity Range 0 to 19.99 µS/cm,
20.0 to 199.9µS/cm,
200 to 1999 µS/cm;
2.00 to 19.99 mS/cm,
20.0 to 199.9 mS/cm
0 to 19.99 µS/cm,
20.0 to 199.9µS/cm,
200 to 1999 µS/cm;
2.00 to 19.99 mS/cm,
20.0 to 199.9 mS/cm
TDS Range 0.00 to 9.99 ppm
10.0 to 99.9 ppm
100 to 999 ppm;
1.00 to 9.99 ppt
10.0 to 99.9 ppt
0.00 to 9.99 ppm
10.0 to 99.9 ppm
100 to 999 ppm;
1.00 to 9.99 ppt
10.0 to 99.9 ppt
Resolution 0.05 % Full Scale 0.05 % Full Scale
Accuracy ±1% F.S. +1 digit ±1% F.S. +1 digit
Temperature Range
-10.0 to 110.0°C -10.0 to 110.0°C
(14.0 to 230 °F)
Temperature
Resolution °C
0.1 °C 0.1 °C
Temperature
Resolution °F
Not available
0.1 °F(from 14.0°F to 199.9°F) &
1.0°F(from 200°F to 230°F)
Temperature Accuracy
± 0.5 °C ± 0.5 °C (±0.9 °F)
Cell Constant, K 0.1, 1.0, 10.0 (Selectable) 0.1, 1.0, 10.0 (Selectable)
Temperature
Compensation
Automatic / Manual (from 0 to
100°C)
Automatic / Manual (from 0 to
100°C)
Temperature
Coefficient
0.0 to 10.0% / ° C 0.0 to 10.0% / ° C
Normalisation
Temperature
20.0 or 25.0°C 20.0 or 25.0°C
TDS Factor 0.40 to 1.00 0.40 to 1.00
Calibration Points
(Automatic)
84.0, 1413µs/cm; 12.88, 111.8
mS/cm
84.0, 1413µs/cm; 12.88, 111.8
mS/cm
Calibration Points
(Manual)
User defined standard / 1 per
range up to 5 points.
User defined standard / 1 per
range up to 5 points.
Single/Multi point
calibration
Selectable Selectable
Calibration Range 10% to full scale 10% to full scale
Auto-ranging Yes (manual select available ) Yes (manual select available )
HOLD Function Yes Yes
Memory 50 Data Sets 100 Data Sets
Auto Off Selectable Selectable
Auto Off Time 20 minutes after last key
operation
20 minutes after last key
operation
To Next Page
Loading...
