Oberheim MC 2000 User Manual

MC 2000
Expandable MIDI Master Controller
130
As in the equivalent "WRITE PROGRAM CHANGES TABLES" subpage already
examined, here the user is prompted to assign a location to the SYS-EX table just
acquired or constructed, after which the WRITE key can be pressed again to save the
exclusive code strings, or [ESC] to abort. To give a new name to the table, the user
presses the [F6] function key ("name") to call up the "ASSIGN NEW EXCTABLE NAME"
subpage, where the name is assigned using the procedure described in section 4.
Once the name has been typed, it is confirmed by pressing [F6] ("done") and the table can
be memorized with the new name by pressing the [WRITE] key.
7.5. SYSTEM CONTROLS
7.5.1. Introduction
Pressing the [F4] function key or using the usual procedure to select the "SYSTEM CTRL"
field from the "Utility Master" video page gives access to the section which allows setting
of the messages associated to the Wheels and the system pedals, and the range of values
permitted for sliders and pedals. The display appears as follows:

Oberheim MC 2000 Specifications

General

Brand	Oberheim
Model	MC 2000
Category	Music Equipment
Language	English