MC 2000
Expandable MIDI Master Controller
142
9. SUPPLEMENTARY MESSAGES
9.1. MALFUNCTION MESSAGES
SYSTEM RESET!
The MC 2000 has detected a serious malfunction of its electronic components. Contact an
OBERHEIM authorized service centre as soon as possible.
UART (DA 0 A 4): CHIP FAILURE!
The control software has noted that a UART chip does not respond to the system. Since
the UART chips control the serial ports of the MC 2000 (i.e. the MIDI OUT ports), after
display of this message some of them might not work properly. Contact an authorized
service centre for a solution to the problem.
KEYBOARD FAILED!
During the self-testing procedure (which takes place whenever the instrument is switched
on) the keyboard has not responded to the control messages. Contact an authorized
service centre for a solution to the problem.
To Next Page
Loading...
Need help?
General