MC 2000
Expandable MIDI Master Controller
143
9.2. ERROR MESSAGES
IN (1-2): MIDI STATUS ERROR!
The error may appear in any operating mode (Program, Edit, Chain, Utility) and indicates
the presence of unrecognizable MIDI data at the MC 2000 input ports.
Check the instruments from which the data originate and the connections made.
PATCH (NUMBER-BANK) ERROR!
The memory location of the selected patch contains data not recognized by the MC 2000
software. If the error persists, perform a Factory Setting (reset) of the memory location
concerned following the instructions provided in point 10.1 "Reset (Factory Setting)
procedure".
To Next Page
Loading...
Need help?
General