108
White lines across the page
îš„ Make sure that you use paper that meets our specifications. A rough surfaced
paper or thick print media can cause the problem. (See
Acceptable paper
and other media on page 10.)
îš„ Make sure that you choose the proper media type in the printer driver or in the
machine’s Paper Type menu setting. (See
Acceptable paper and other
media on page 10 and Basic tab in the Software User’s Guide on the
CD-ROM.)
îš„ The problem may disappear by itself. Print multiple pages to clear this
problem, especially if the machine has not been used for a long time.
îš„ Clean the scanner window with a soft cloth. (See
Cleaning the laser
scanner window on page 124.)
îš„ The drum unit may be damaged. Put in a new drum unit. (See
Replacing the
drum unit (485-4)
on page 131.)
Lines across the page
îš„ Clean the primary corona wire in the drum unit. (See Cleaning the corona
wire on page 126.)
îš„ Clean the scanner window with a soft cloth. (See Cleaning the laser
scanner window
on page 124.)
îš„ The drum unit may be damaged. Put in a new drum unit. (See Replacing the
drum unit (485-4) on page 131.)
Black lines down the page
Printed pages have toner
stains or stripes down the page.
îš„ Clean the primary corona wire of the drum unit. (See Cleaning the corona
wire on page 126.)
 Make sure the primary corona wire’s blue tab is at the home position (a).
îš„ The drum unit may be damaged. Put in a new drum unit. (See
Replacing the
drum unit (485-4)
on page 131.)
îš„ The toner cartridge may be damaged. Put in a new toner cartridge. (See
Replacing the toner cartridge (485-5) on page 128.)
 The fuser unit may be smudged. Call Océ Imagistics National Diagnostic
Center at 1-800-243-5556 (in USA).
White lines down the page
îš„ Clean the laser scanner window with a soft cloth. (See Cleaning the laser
scanner window
on page 124.)
îš„ The toner cartridge may be damaged. Put in a new toner cartridge.
(See
Replacing the toner cartridge (485-5) on page 128.)
Page skewed
îš„ Make sure the paper or other print media is loaded properly in the paper tray
and that the guides are not too tight or too loose against the paper stack.
îš„ Set the paper guides correctly.
îš„ If you are using the MP tray, see
Loading envelopes and other media on
page 14.
îš„ The paper tray may be too full.
îš„ Check the paper type and quality. (See
Acceptable paper and other
media
on page 10.)
Examples of poor print
quality
Recommendation
ABCDEFGH
abcdefghijk
ABCD
abcde
01234
ABCDEFGH
abcdefghijk
ABCD
abcde
01234
ABCDEFGH
abcdefghijk
ABCD
abcde
01234
ABCDEFGH
abcdefghijk
ABCD
abcde
01234
ABCDEFGH
abcdefghijk
ABCD
abcde
01234
To Next Page
Loading...
Need help?
General
