Sending a fax
33
5
Additional sending
operations 5
Sending faxes using multiple
settings 5
Before you send a fax, you can change any
combination of these settings: contrast,
resolution, overseas mode, delayed fax timer,
polling transmission, real time transmission
or cover sheet settings.
a Make sure you are in Fax mode .
After each setting is accepted, the LCD
asks if you want to enter more settings:
32.TX Settings
Other Settings?
a 1.Yes
b 2.No
Select
ab & OK
b Do one of the following:
To choose more settings, press 1.
The LCD returns to the
Tx Settings menu.
If you have finished choosing
settings, press 2 and go to the next
step.
Electronic cover sheet 5
This feature will not work unless you have
already programmed your Machine ID. (See
the Quick Setup Guide.)
You can automatically send a cover sheet
with every fax. Your cover sheet includes
your Machine ID, a comment, and the name
stored in the One-Touch or Speed-Dial
memory.
By choosing Next Fax:On you can also
display the number of pages on the cover
sheet.
You can choose one of the following preset
comments, or you can store two personal
comments, up to 27 characters long:
Comment Off
Please Call
Urgent
Confidential
Composing your own comments 5
You can set up two comments of your own.
a Make sure you are in Fax mode .
b Press Menu, 3, 2, 8.
32.TX Settings
8.Cover Message
a 5.
b 6.
Select ab & OK
c Press a or b to choose 5 or 6 to store
your own comment. Press OK.
d Enter your own comment using the dial
pad. Press OK.
Use the chart on page 150 for help entering
characters.
To Next Page
Loading...
Need help?
General
