Chapter 2
14
Loading envelopes and other
media 2
Use the MP tray when printing envelopes,
labels, and thick paper.
a Open the MP tray and lower it gently.
b Pull out the MP tray support.
c Insert the media into the MP tray with
the top edge first and the printing side
face up.
Loading Envelopes 2
Before loading, press the corners and sides
of the envelopes to make them as flat as
possible.
CAUTION
Do not use the following types of
envelopes, as they will cause paper feed
problems:
• That are of a baggy construction.
• That are embossed (have raised writing
on them).
• That have clasps or staples.
• That are pre-printed on the inside.
Glue 2
Rounded
flap 2
Double
flap 2
Triangular
flap 2
To Next Page
Loading...
