Oce fx3000 User Manual

146
7.LAN 1.TCP/IP 1.BOOT Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT method
that best suits your needs.
See Network User’s Guide on the CD-ROM.
2.IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
3.Subnet Mask [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet mask.
4.Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway address.
5.Node Name BRN_XXXXXX
Enter the Node name.
6.WINS Config Auto*
Static
Chooses the WINS
configuration mode.
7.WINS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address of the
primary or secondary WINS
server.
8.DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address of the
primary or secondary DNS
server.
9.APIPA On*
Off
Automatically allocates the IP
address from the
linklocal address range.
0.IPv6 On
Off*
2.Ethernet Auto*
100B-FD
100B-HD
10B-FD
10B-HD
Chooses the Ethernet link
mode.
Main Menu Submenu Menu Selections Options Descriptions Page

Oce fx3000 Specifications

General

Brand	Oce
Model	fx3000
Category	All in One Printer
Language	English