PIZZAFORM
Installation and connections
GB - 13
FIG. 1
4.1 - TYPE OF USE AND CONTRAINDICATIONS
IMPORTANT
PressForm hot forming machine allows pizza dough
discs with diff erent diameter and thic kness
depending on the mac hine models and the
adjustment, beginning fr om a risen dough ball, to
be obtained.
The machine should be used for this purpose only;
any other use will release the manufacturer from all
responsibilities f or accidents to per sons or
properties and will cancel all guarantee rights.
4.2 - SAFETY PLATES (Fig. 1)
The warning plates with explanatory symbols are to be
found in all those areas that ma y be dangerous f or
operators or engineers.
DANGER
Anyone preparing to w ork on the mac hine should
protect the warning plates with the saf ety
instructions. The non compliance with the
instructions mentioned on the safety plates will
release the manufacturer from all responsibilities for
damages or injuries to per sons or pr operties that
may arise.
Danger: machine under voltage
• Do not work with the machine under voltage.
Risk of burns
• Risk of burns: do not touch by hand.
Chapter 4
To Next Page
Loading...
