EC-compliant use and warning instructions
CHAPTER 2 – PRELIMINARY INFORMATION
The qualifications shown in the table on this page are obligatory within a category of people defined as "trained
person”.
The one who has been informed, instructed and trained at work and any dangers
arising from misuse. He also knows the importance of safety devices, safety
standards and safe working conditions.
2.6. Symbols used in manual
Symbol used to identify warnings that are important for the safety of the operator
and/or machine.
Symbol used to identify information of particular importance in the manual. The
information also relates to the safety of personnel involved in the use of the
machine.
Symbol used to indicate a general prohibition.
Symbol used to indicate the obligation to read instructions for use and maintenance
before using the device.
2.7. Glossary
In manuals you can find a technical terminology or with an unusual meaning.
The following explains the used terms and abbreviations:
Components or equipment not connected to the machines that allow, located
between the machine and the load or on the load itself, the grasp of the load. The
harnesses and their components are also considered lifting accessories.
It derives from the words ATmosphères and EXplosibles and it is the conventional
name that groups two directives of the European Union (EU):
• 2014/34/EU for the regulation of the equipment used in explosion risk
areas;
• 99/92/CE for the safety and health of the workers in explosive
atmospheres or in explosion risk environments.
A general failure that prevents the normal operation of a machine, a plant, etc.
Elements designed and built for lifting purposes as an integral part of lifting
machines or lifting accessories.
To Next Page
Loading...
