CHAPTER 8 – PUTTING THE EQUIPMENT OUT OF ORDER
AND DISPOSING OF IT
8.2. Disposal
When you intend to dispose of the equipment, you must make sure to secure it. Proceed as follows:
Disconnect power supply from the equipment.
Proceed with dismatling, separating the components making up the equipment in groups ready for
differentiated disposal.
ATTENTION!
To disassemble commercial parts or subcontracting material making up the equipment supplied by
OEM ALI GROUP S.R.L A SOCIO UNICO, please refer to the relevant user manual supplied.
According to the “WEEE” Directive 2012/19/EU, if the component/equipment purchased is marked
with this symbol of a crossed-out rubbish bin with wheels, it means that, at the end of its useful life,
the product must be collected separately from the other waste.
ATTENTION!
Always respect the disposal regulations in force in the country where the equipment is installed.
To Next Page
Loading...
