OEM TL 45 - Opening;Closing Moving Flips

PIZZA OVEN mod. TL
CHAPTER 6– COMMANDS AND USE
Page 61
IMPORTANT!
During baking you can change the parameters by acting on the relevant buttons as explained in the
previous paragraphs (See paragraph "Operator panel”).
IMPORTANT!
Perform some baking tests to find the correct parameters.
6.5.3. Opening/closing moving flips
To open/close the moving flips, pls follow the described steps:
STEP
ACTON
1
Rotate the knob (A) to unlock the flips handling.
2
Using the lever (B) raise/lower the flip (C).
3
Once you have reached the desired position, lock the flip using the knob (A).
C
A
B