EC-compliant use and warning instructions
CHAPTER 2 – PRELIMINARY INFORMATION
2.9. User safety areas
The areas around the machine are divided as follows:
These are the areas where the user and other operators can perform control and
command operations of the cyclical functions of the machine both automatically and
semi-automatically, acting on the appropriate control panels or for the execution of
the manual operations.
Maintenance Zones/
Adjustment
These are the areas where mechanical maintainers can perform maintenance or
regulation. These areas are considered dangerous and not accessible during the
normal operation of the oven. Operators should be fully aware of safety warnings
and individual devices to wear.
All spaces inside and/or around the machine where a person may be exposed to
danger.
The dangers and risks that exist in these areas are protected, as far as possible, by protections (carters, hatches).
BAN!
When the machine is ON, it is ABSOLUTELY BANNED to operate in dangerous areas as some risks
may not have been totally cancelled.
To Next Page
Loading...
