OEM TL 45 - Page 39

PIZZA OVEN mod. TL
CHAPTER 5– TRANSPORT AND INSTALLATION
Page 39
5
Tilt the forks backwards (towards the driver's seat) to ensure greater load stability during transport.
6
Adjust transport speed based on pavement and load type, avoiding abrupt manoeuvres.
TRANSPORT WITH GRU / HOIST
Operator qualification
Conductor of lifting means
Required DPI
Lifting mean
Crane / hoist
Tools to use
Straps
ATTENTION!
Use only suitable and approved lifting means, compatible for the size and weight of the machine; do
not use steel ropes to avoid damaging the body of the machine.
ATTENTION!
Make sure no one is under and within range of the lifting mean.
For a successfully transport by crane/hoist, follow the following steps:
STEP
ACTION
1
Lift, slightly and alternately, the four corners of the machine and place below the spacers.
Note: If necessary, use a forklift (see previous page).
2
Pass two straps under the machine's plinth.
3
Connect the straps to the hook of the lifting system (crane/hoist).