EC-compliant use and warning instructions
CHAPTER 5 – TRANSPORT AND INSTALLATION
The machine is designed and built to operate, safely, under the following environmental conditions:
Maximum relative humidity
Any floor that can support its weight
ATTENTION!
Environmental conditions other than those specified can cause serious damages to the machine.
The positioning of the machine in environments that do not correspond to what is indicated causes
the expiry of the warranty.
ATTENTION!
During the normal operation of the oven, do not expose to air currents because they can compromise
the baking.
IMPORTANT!
The work surface must be sufficiently illuminated.
If there are shadows or differences in height, it will be up to the user to set up appropriate lighting
devices.
If these requirements are not met, the Manufacturer disclaims any responsibility.
To Next Page
Loading...
