OEM TL 45 - Page 70

EC-compliant use and warning instructions
Page 70
CHAPTER 7 – MAINTENANCE
7.2.2.5. RESTART OF SAFETY THERMOSTAT
DANGER!
Make sure there is NO tension inside the electric panel.
In order to restart the safety thermostat, proceed as follows:
STEP
ACTION
1
Unscrew the fixing screws (A) that block the panel (B).
2
Overturn the panel outwards (B). It is fixed to the base through some hinges
3
Unscrew the plastic tap on the thermostat.
4
Press the key (C) on the thermostat.
ATTENTION!
If the thermostat is reinserted several times, the oven has got a problem.
Contact the Technical Assistance.
B
A
A
C