OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ote.com 67
To transfer the test data to a PC:
1. Remove the disk from the chart recorder and insert it into the appropriate
drive on the PC.
2. From the Start Menu, select “Programs” then “Eurotherm” and then click
“Review”. This will open the Eurotherm Review software application.
3. From the “File” menu, select “Transfer” and then click “Files”.
4. Click the “Browse” button, then choose the appropriate drive for your
removable media. Open the “History” folder and select the les you wish
to transfer.
5. Type a name in the “Name” eld and click “OK”.
At this point you will receive a warning message. Click “OK” again.
6. When the le transfer is complete, go to the “File” menu and click “New
Chart”.
7. Click “Add Point”.
8. From the “Instrument” drop-down menu, choose the name you selected in
step 5.
To Next Page
Loading...
