OHAUS FC5706 - Submenu Running Time; Submenu Software Status

CHAPTER 2 SERVICE MENU
FC5706 Centrifuge Service Manual 2-3 Ohaus Corporation www.ohaus.com
2.1.4 Submenu Running Time
Here you can read off the operating hours of the motor.
 Activate the operation menu as described in chapter 2.1.1.
 Turn the potentiometer until the special digit “service h“ appears in the display “acc/dec”
(A-2).
Figure 4
In the display “rpm/rcf“ (A-1) the running time of the motor is indicated now.
2.1.5 Submenu software status
Here you can read off the software status.
 Activate the operation menu as described in chapter 2.1.1.
 Turn the potentiometer (1) until the special digit ”service S“ appears in the display
„acc/dec” (A-2).
Figure 5
In the display “rpm/rcf“ (A-1) the actual software status is indicated now.